Top 10 Standoffs for Acrylic – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. Geekworm

#ad

Geekworm Raspberry Pi 4 Case, 3B, Raspberry Pi Universal HAT Size Case DIY Kit, 2B, Pi 4B Protective Acrylic Case for Raspberry Pi 4 Model B, B+ and Raspberry Pi Hat Expansion Board, Raspberry Pi 3B+

#ad
Geekworm #ad - This is a protection solution for non-standard boards running boards on top of the raspberry pi, this case only compatible with those board which are fitted with the raspberry pi hat, but Please note, and please check the size of the case carefully to make sure that it will meet your need.

The raspberry pi or the expansion board is not included. For the installation, please refer to Installation Guide in the product description. Compatible with raspberry pi 4 model b/ pi 3 model b+ / pi3 model b/ 2B / B+ and Pi Hat expansion board Like X705 UPS/X725 UPS. Packing list: 1 x acrylic case; 1 x Pack of Screws. It is a perfect acrylic case diy kit to install raspberry pi hat expansion board with Raspberry Pi 4 Model B/ Pi 3 Model B plus / 2B / Pi 3 Model B+/ Pi3 Model B / B+ mother board together.
BrandGeekworm #ad
ManufacturerGeekwrom #ad
Height2.36 Inches
Length3.62 Inches
Weight0.07 Pounds
Width0.24 Inches
Part NumberTB-2017-37
ModelTB-471905

2. BQZYX+

#ad

2 in 1 6-Ways 12V RGB Hub and 12V PWM DC Fan Hub with Acrylic Case and Magnetic Standoff for ASUS/MSI 12V 4Pin LED Controller,Newest Version

#ad
BQZYX+ #ad - 4. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.

Please note 4pin fan speed can be adjusted by temperature control. 1. 12v rgb hub in the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function. 3. This 12v rgb hub 4 pin rgb and 4pin pwm hub can extend any 12V addressable RGB products simultaneously, while only taking up one RGB header on your motherboard.

5. For both 4-pin and 3-pin fans. 2. 12v rgb hub controller this hub is only compatible with 4pin 12V addressable RGB headers or controllers. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. Not connect to 5v 3 pin rGB components, making sure the arrows on connectors and headers line up.
BrandBQZYX+ #ad
ManufacturerZYX #ad
Part NumberZYXHN-09D

3. Mustpoint

#ad

Newest Version 12V RGB Hub with Acrylic Case and Magnetic Standoff?for ASUS/MSI 12V 4Pin LED Controller

#ad
Mustpoint #ad - This hub is only compatible with 4pin 12v addressable RGB headers or controllers. 4. Rgb cable length:60cm. Magnetic standoff design for easily fixing the hub in the chassis. Not connect to 5v 3 pin RGB LED strip and M/B. 2. 1. This 4 pin rgb hub can extend any 12v addressable RGB products simultaneously, while only connecting one RGB cable on your motherboard. 5. 3. Product dimension: 100 x 62 x 16mm.
BrandMustpoint #ad
ManufacturerMustpoint #ad
Part Number12V RGB Hub

4. HLT

#ad

HLT Newest Version 12V RGB Hub with Acrylic Case and Magnetic Standoff for ASUS/MSI 12V 4Pin LED Controller

#ad
HLT #ad - This hub is only compatible with 4pin 12v addressable RGB headers or controllers. 3. Magnetic standoff design for easily fixing the hub in the chassis. Rgb cable length:60cm. 2. Product dimension: 100 x 62 x 16mm. 4. Not connect to 5v 3 pin RGB LED strip and M/B. 5. 1. This 4 pin rgb hub can extend any 12v addressable RGB products simultaneously, while only connecting one RGB cable on your motherboard.
BrandHLT #ad
ManufacturerHLT #ad
Height0.63 Inches
Length3.94 Inches
Width2.44 Inches
Part NumberDH112257

5. Diyeeni

#ad

Acrylic Frame 4mm Transparent Fashion DIY Base Stand Suitable for ATX motherbar,Can accommodate high Performance PC Open Frame

#ad
Diyeeni #ad - Made of acrylic material, transparent and more fashion. Convenient for testing, overclocking or gaming; Support longer graphic card. Easy to install, for ATX motherbard. Open style delivers better performance on cooling, compatibility and maintenance. This case has enough space for any big sized parts needed for the high performance PC.
BrandDiyeeni #ad
ManufacturerDiyeeni #ad
Height0.16 Inches
Length12.99 Inches
Weight1.39 Pounds
Width10.55 Inches
Part NumberDiyeeni3a2g7904di

6. Timack

#ad

2 in 1 6-Ways 5V ARGB and 12V PWM DC Fan Hub with Acrylic Case and Magnetic Standoff for ASUS/MSI 5V 3Pin LED Controller

#ad
Timack #ad - 2 in 1 6-ways 5v argb and 12v pwm dc fan hub with acrylic case and Magnetic Standoff for ASUS/MSI 5V 3Pin LED Controller. Pwm 4pin header x6, compatible with 3pin cable Speed control function is unavailable for 3 pin fans, The red 4pin 90°pin header is only connect CPU fan.

Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. For both 4-pin and 3-pin fans. This 3 pin rgb and 4pin pwm hub can extend any 5V addressable RGB products simultaneously, while connecting one RGB cable on your motherboard. Please note 4pin fan speed can be adjusted by temperature control. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.
BrandTimack #ad
ManufacturerTMK #ad
Part NumberTMK-38GT

7. Timack

#ad

12V RGB Hub with Acrylic Case and Magnetic Standoff for ASUS/MSI 12V 4Pin LED Controller

#ad
Timack #ad - 12v rgb hub with acrylic case and magnetic standoff for ASUS/MSI 12V 4Pin LED Controller. This 4 pin rgb hub can extend any 12v addressable RGB products simultaneously, while only connecting one RGB cable on your motherboard. Not connect to 5v 3 pin RGB LED strip and M/B. This hub is only compatible with 4pin 12v addressable RGB headers or controllers. Magnetic standoff design for easily fixing the hub in the chassis.
BrandTimack #ad
ManufacturerTMK #ad
Part NumberTMK-E3R4

8. Mustpoint

#ad

Newest Version 2 in 1 6-Ways 5V ARGB and 12V PWM DC Fan Hub with Acrylic Case and Magnetic Standoff?for ASUS/MSI 5V 3Pin LED Controller

#ad
Mustpoint #ad - 1. Rgb cable length: 60cm. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. 3. Please note 4pin fan speed can be adjusted by temperature control. This 3 pin rgb and 4pin pwm dc fan hub pwm hub can extend any 5V addressable RGB products simultaneously, while connecting one RGB cable on your motherboard. 2. Product dimension: 100 x 62 x 16mm. 4. For both 4-pin and 3-pin fans. 5. Magnetic standoff design for easily fixing the hub in the chassis.
BrandMustpoint #ad
ManufacturerMustpoint #ad
Part Number5V ARGB

9. Mustpoint

#ad

Newest Version 2 in 1 6-Ways 12V ARGB and 12V PWM DC Fan Hub with Acrylic Case and Magnetic Standoff?for ASUS/MSI 12V 4Pin LED Controller

#ad
Mustpoint #ad - This 4 pin rgb and 4pin pwm hub can extend any 12V addressable RGB products simultaneously, while only taking up one RGB header on your motherboard. 1. Magnetic standoff design for easily fixing the hub in the chassis. Rgb cable length: 60cm. 4. Product dimension: 100 x 62 x 16mm. Please note 4pin fan speed can be adjusted by temperature control. 5. 2. For both 4-pin and 3-pin fans. 3. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
BrandMustpoint #ad
ManufacturerMustpoint #ad
Part Number12V ARGB

10. Timack

#ad

2 in 1 6-Ways 12V ARGB and 12V PWM DC Fan Hub with Acrylic Case and Magnetic Standoff for ASUS/MSI 12V 4Pin LED Controller

#ad
Timack #ad - Pwm 4pin header x6, compatible with 3pin cable Speed control function is unavailable for 3 pin fans, The red 4pin 90°pin header is only connect CPU fan. In the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function.

Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal. This 4 pin rgb and 4pin pwm hub can extend any 12V addressable RGB products simultaneously, while only taking up one RGB header on your motherboard.

This hub is only compatible with 4pin 12v addressable RGB headers or controllers. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. Not connect to 5v 3 pin rGB components, making sure the arrows on connectors and headers line up.
BrandTimack #ad
ManufacturerTMK #ad
Part NumberTMK-DF56SA