As an Amazon Associate I earn from qualifying purchases.
1. SunFounder #ad
SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino R3 Mega2560 #adSunFounder #ad
- Compatible with arduino r3/mega2560 board. Iic/i2c interface; only takes two I/O ports. Working voltage: 5v dc; Dimension: 60×99x22 mm.
Http://wiki. Sunfounder. Cc/index. Php?title=i2c_LCD2004. I2c address: 0x27 or 0x3F. Sunfounder i2c lcd 2004 displays characters of 4 rows with 20 characters in each.
|Part Number||IIC 2004/1602 LCD|
2. UCTRONICS #ad
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI #adUCTRONICS #ad
- No embedded fonts inside the oled controller, user can create the fonts through the font generation software. Uctronics 096 inch oled module for showing graphical & textual information directly on your micro-controller projects.
Resolution: 128 x 64, power consumption: 004w during normal operation, Support voltage: 3. 3v-5v dc, view angle: > 160°, full screen lit 008w. It has super high contrast, bright and crisp dots, even tiny fonts quite readable.
Needn't backlight, the display unit can self-luminous. Communication: i2c/iic Interface, only need two I / O ports. Embedded driver ic: ssd1306. We offer technical support and software library as well as the guide book in the package. It supports many chips: arduino uno and Mega, STIM 32, Raspberry pi, 51 MCU, etc. The uno shown in the picture is NOT INCLUDE.
3. LGDehome #ad
LGDehome 16x2 1602 LCD Display Screen Blue Backlight + IIC i2c Module Interface Adapter for Arduino UNO R3 MEGA2560 and Raspberry pi2 Pack #adLGDehome #ad
- Working voltage:5v; four pin definition:GND, SDA, VCC, SCL. With a potentiometer used to adjust Blue backlight and contrast.
Displays 2-lines X 16-characters. Compatible for arduino and Raspberry pi;Support IIC protocol. Component:2 pack blue 16x2 1602 lcd display + 2 Pack i2c serial interface backpack.
4. GeeekPi #ad
GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things #adGeeekPi #ad
- Commonly used in: internet of things, smartbuilding, DIY project, home animation, maker's DIY project. With a potentiometer used to adjust backlight color: Blue and contrast.
Power supply: 5v and i2c address is: 0x27 Module dimension: 80mm x 35mm x 11mm. Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
Compatible with all current development boards, Tinkerboard, such as Arduino, Banana pi, Raspberry pi, Nano pi, stm32 and so on. Wiki:http://wiki. 52pi. Com/index. Php?title=1602_serial_lcd_module_Display_SKU:Z-0234.
5. kuman #ad
Kuman 3.5 inch TFT Touch Screen with SD Card Socket w/Tutorials in CD Compatible for Arduino Mega2560 Board SC3A-1 #adkuman #ad
- No external power supply needed. 3. 5 inch lcd touch screen with a touch pen for Arduino. 3. 5 inch screen is designed for arduino board modules, 320*480 resolution, better display. High quality 3.
5 inch touch screen with better price and good customer service. Compatible with arduino mega2560 development board directly, no any wiring needed. Sd card with 2560 is not supported. We offer tutorial for beginners who would like to make projects via amazon.
6. MakerFocus #ad
MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Arduino #adMakerFocus #ad
- Use with arduino, stm32, esp8266, esp32, etc; 3.35v power; operating temperature:-40 - 85 ℃. Product manual: https://drive. Google. Com/open?id=14a_lufwqvzaku-PKTfJdWmUZ4T4Wk65X. Plz note: these i2c olED Display Modules come without pin headers.
The display performance is better than the traditional LCD display, also lower consumption; SSD 1306 oled display; I2C oled display, IIC I2C communications simplifies connections;.
How to email us? plz click “makerfocus” and click “Ask a question” to email us! Looking for your consultation! Please do not buy shenzhen jinmao electronics co.
There is only one module in their packaging, please do not be fooled! Please feel free to email us if you have any questions, please look for the MakerFocus brand, Ltd. We are not authorized to them, we will help you to resolve it asap. 128x32 oled display, self-illumination, no need backlight, Display Color: White.
7. waveshare #ad
262K Color with Examples for Raspberry Pi/Jetson Nano/Arduino/STM32, Waveshare 2inch LCD Display Module IPS Screen 240×320 Resolution Onboard Driver ST7789 SPI Interface RGB #adwaveshare #ad
- Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Spi interface, requires minimum GPIO for controlling.
Development resources download: www. Waveshare. Com/wiki/2inch_LCD_Module. This is a general lcd display module, ips screen, 240×320 resolution, 2inch diagonal, with embedded controller, communicating via SPI interface.
8. ELEGOO #ad
ELEGOO UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket w/All Technical Data in CD for Arduino UNO R3 #adELEGOO #ad
- We have always cared about the customer experience and improve the product function details. Free tutorial in cd, better price, better service.
With technical data. Not including the uno R3 controller board and usb cable. 8 inches colorful display lcd screen. With touch pen inside, you can use it more easily. 2.
9. WayinTop #ad
WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter for Arduino Mega 2560 Blue/2004 #adWayinTop #ad
- You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back. Iic interface adapterno need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time.
Easy to use less i/o ports are occupied, only four - VCC, GND, sda serial data line, SCL serial clock line.
Support iic interfaceit only takes two i/o port thus saving more for other usages. Address of the module: 0x27. 20x4 lcd displaywith this shield, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, you can display whatever you want by programming the Arduino board.
Therefore, 4 rows can display 80 characters. Widely applicationslcd display module based on the popular HD44780 controller, works great with Arduino / Mega2560 board and other micro-controllers.
10. KAILEDI. #ad
KAILEDI. Display 0.96 Inch Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI #adKAILEDI. #ad
- It supports many chips: arduino UNO and Mega, STIM 32, etc. 51 mcu, raspberry pi, the uno shown in the picture is NOT INCLUDE. It has super high contrast, bright and crisp dots, even tiny fonts quite readable.
Embedded driver ic: ssd1306. Resolution: 128 x 64, power consumption: 004w during normal operation, View angle: > 160°, Support voltage: 3. 3v-5v dc, full screen lit 008w. Kailedi 096 inch oled module for showing graphical & textual information directly on your micro-controller projects.
Communication: i2c/iic Interface, only need two I / O ports. Needn't backlight, the display unit can self-luminous. No embedded fonts inside the oled controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package.