As an Amazon Associate I earn from qualifying purchases.

1. KECC

#ad

KECC Laptop Case Compatible with MacBook Pro 13" 2020/2019/2018/2017/2016, Touch Bar w/Keyboard Cover + Sleeve + Screen Protector Hard Shell A2159/A1989/A1706/A1708 Purple Flower

#ad
KECC #ad - Sleek, glossy 2 piece design - easy to install and take off. Cut out design, shines through the case. Kecc mac lapop shell case cover is very Slim and light weight. Please check your mac model number before you purchase to ensure you get the corrECT SIZE.

4 rubberized feet keeps your mac Laptop Notebook Stable and Secure. Design lets you open/close your mac all the way and Full Access to All Ports. It is not compatible with old mac pro 13" with retina display a1502 / a1425 and old mac pro 13" with cd drive A1278. Mac pro 13 inch case 2020/2019/2018/2017/2016, with or without touch bar cover is for model number a2159 / a1989 / a1706 / a1708 only.

Easy and convenient to Carry Around with your bags. Mac hard shell cover contains a layer of rubber oil paint for a Smooth Rubberized Exterior Texture - Prevent Fingerprints, Scratches, Drops, Slipping, Dirt, Smudges and Other Damages. Bottom shell case cover Vented for Maximum Heat Dissipation and Disbursement.
BrandKECC #ad
ManufacturerKECC #ad
Weight0.44 Pounds
Part NumberPURPF-P13-2016-KC-S-SP
ModelPURPF-P13-2016-KC-S-SP

2. LUVCASE

#ad

LuvCase 2 in 1 Laptop Case Compatible with MacBook Pro 13" 2016-2020 +/- Touch Bar A2159/A1989/A1706/A1708 Rubberized Plastic Hard Shell Cover & Keyboard Cover Orange

#ad
LUVCASE #ad - 4 rubberized feet keeps your MacBook Pro 13 Inch Laptop Notebook Stable and Secure. This macbook pro 13. 3 2020 & 2017 & 2018 & 2019 & 2016 case contains a layer of rubber oil paint for a Smooth Rubberized Exterior Texture - Prevent Fingerprints, Scratches, Slipping, Smudges, Drops, Dirt, Liquid and Other Damages.

This macbook pro 13 hard shell cover includes a bottom shell, which is vented to allow maximum heat dissipation to avoid overheating. We would not be held responsible if you purchase the wrong size. It allows full access to ALL Ports and Features. This macbook pro 13. 3 inch 2020 & 2019 & 2018 & 2017 & 2016 case cover has a unique cut out design.

Snap on design, Easy to Take it On and Off. Please read: luvcase laptop plastic case cover is only compatible with macbook pro 13 inch 2020 & 2018 & 2019 & 2017 & 2016 with or without Touch Bar, A1989, A2159, A1706 or A1708. It is lightweight and slim, perfect to use along with Keyboard Cover / Screen Protector / Laptop Sleeve. Please check the model number AXXXX at the bottom of your MacBook to determine the compatibility.
BrandLUVCASE #ad
ManufacturerLuvCase #ad
Part Number2016PRO13-ORANGE+KC
Model2016PRO13-ORANGE+KC

3. iLeadon

#ad

Black Map, iLeadon MacBook New Pro 13" Case 2016-2019 Release A2159/A1989/A1706/A1708 Rubberized Hard Shell Case Cover+Keyboard Cover for MacBook Pro 13 W/Without Touch Bar & Touch ID

#ad
iLeadon #ad - Package include top and bottom case, 4 pieces anti-skid rubberized feet, keyboard cover. Simple clip-on/off design without the added risk of harming your laptop during application.

Plug your charger, cable or headset without removing the case. Not fit the 2020 latest macbook pro 13” Model A2251/A2289. Please kindly check model number on the bottom of your macbook before you place order. Bottom shell vented for maximum heat dissipation lightweight, two-piece, snap-on case includes four support feet. Protect your macbook in style with this Art Print Ultra Slim Rubberized durable plastic shell. This case only fit for apple macbook pro 13" with/without touch bar a1706/a1708/a1989/a21592016-2019 release.
BrandiLeadon #ad
ManufactureriLeadon #ad
Part NumberIL-FST1009

4. LUVCASE

#ad

LuvCase 4 in 1 Laptop Case Compatible with MacBook Pro 13" 2016-2020 +/- Touch Bar A2159/A1989/A1706/A1708 Hard Shell Cover, Keyboard Cover & Screen Protector Pink Marble, Sleeve

#ad
LUVCASE #ad - Snap on design, Easy to Take it On and Off. It allows full access to ALL Ports and Features. 4 rubberized feet keeps your MacBook Pro 13 Inch Laptop Notebook Stable and Secure. Please read: luvcase laptop plastic case cover is only compatible with macbook pro 13 inch 2020 & 2019 & 2018 & 2017 & 2016 with or without Touch Bar, A1989, A2159, A1706 or A1708.

It is lightweight and slim, perfect to use along with Keyboard Cover / Screen Protector / Laptop Sleeve. We would not be held responsible if you purchase the wrong size. This macbook pro 13. 3 2020 & 2017 & 2018 & 2019 & 2016 case contains a layer of rubber oil paint for a Smooth Rubberized Exterior Texture - Prevent Fingerprints, Drops, Dirt, Scratches, Smudges, Slipping, Liquid and Other Damages.

Please check the model number AXXXX at the bottom of your MacBook to determine the compatibility. This macbook pro 13. 3 inch 2020 & 2018 & 2019 & 2017 & 2016 case cover has a unique cut out design. This macbook pro 13 hard shell cover includes a bottom shell, which is vented to allow maximum heat dissipation to avoid overheating.
BrandLUVCASE #ad
ManufacturerLuvCase #ad
Part Number2016PRO13-PM+KC+SP+MS
Model2016PRO13-PM+KC+SP+MS

5. DONGKE

#ad

Dongke Case for MacBook Pro 13 Inch Case 2019 2018 2017 2016 Release A2159 A1989 A1706 A1708 with/Out Touch Bar Rubberized Frosted Matte Hard Shell Cover, Watercolor Cactus

#ad
DONGKE #ad - Fully vented for safe heat disbursement. Two-piece including top and bottom cover, easy on easy off. We guarantee that this is the best and the most beautiful you have ever bought.

Warning: this case is not compatible with newest macbook pro 13 inch release 2020 model: A2251/A2289 and Old MacBook Pro 13 inch with Retina Display Release before 2016 Model: A1502/A1425. Designed for new macbook pro 13 inch with /without touch bar model number: a2159 a1989 A1706 & A1708, Release in 2019 2018 2017 2016. Ultra slim super light-weight frosted Crystal Clear hard cover sleeve to protect your MacBook from scrapes and scratches. The model number is located on the back of the laptop. Plug your charger, Snap on design, cable or headset without removing the case. 3d unique watercolor cactus design from Dongke-Tech let you macbook out of the ordinary.
BrandDONGKE #ad
ManufacturerDongke #ad
Height8.5 Inches
Length12.2 Inches
Width1.2 Inches
Part NumberA1706-X108
ModelA2159/A1989/A1706/A1708

6. IBENZER

#ad

HT13CYBK, IBENZER Hexpact MacBook Pro 13 Inch Case 2020 2019 2018 2017 2016 A2338 A2289 A2251 A2159 A1989 A1706 A1708, Heavy Duty Protective Hard Shell Case Cover for Apple Mac 13 Touch Bar, Black

#ad
IBENZER #ad - Fully vented – macbook pro cover - the ibenzer’s hexpact protective macbook pro 13 cover has cut out vents that facilitates better heat disbursement. Tough honeycomb design – macbook pro 13 inch case - ibenzer’s hexpact macbook pro 13 protective case is dual-layer full-budy rugged and built to withstand the heavies of drops. No cut out design, mlvp2ll/A, transparency is different from color to color.

Unhindered access – macbook pro case - the carrying macbook pro 13. 3 inch case – hard case shell cover design comes with cut-out sections for easy access to all ports, Type C, charging ports etc. Compatibility - newest macbook pro 13 inch model: a2159 a1989 touch bar & a1706 touch bar & a1708 non-touch bar -- release in 2019 2018 2017 2016 - mpxv2ll/a, mpxr2ll/a, mpxt2LL/A, MPXQ2LL/A, mpxy2ll/a, mlh12ll/a, mpxx2ll/a, mpxu2ll/a mll42ll/a, mpxw2ll/a, mnqf2ll/a, mluq2ll/a, MNQG2LL/A. You can even plug your charger, battery check button, cable or headset without removing the Macbook case.

It also has rubberized corner stands that acts to separate the bottom of your Macbook Pro 13 from the surface it's on. This few inches of separation further enhances airflow and heat distribution. Made out of tup and polycarbonate, it dissipates the impact of the fall throughout its honeycomb body to lessen the impact on your Macbook 13 Pro. 360 degrees protection – macbook pro 13 case - with its hard outer shell, soft impact resistant rubber bumpers and bottom skid pads, our unique Macbook Pro 13 inch protective case design are meant to provide 360 degrees of protection for your laptop from everyday drops, knocks and shock.
BrandIBENZER #ad
ManufacturerIBENZER #ad
Height0.9 Inches
Length12.4 Inches
Weight0.69 Pounds
Width8.8 Inches
Part NumberHT13CYBK+MF3PK
ModelMacbook Pro 13" with/without Touch Bar

7. LUVCASE

#ad

Sleeve, USB Hub 3.0, LuvCase 5in1 Laptop Case Compatible with MacBook Pro 13" 2016-2020 +/- Touch Bar A2159/A1989/A1706/A1708 Hard Shell Cover, Keyboard Cover & Screen Protector Pink Marble

#ad
LUVCASE #ad - This macbook pro 13. 3 inch 2020 & 2018 & 2017 & 2019 & 2016 case cover has a unique cut out design. This macbook pro 13 hard shell cover includes a bottom shell, which is vented to allow maximum heat dissipation to avoid overheating.

It allows full access to ALL Ports and Features. It is lightweight and slim, perfect to use along with Keyboard Cover / Screen Protector / Laptop Sleeve. Please check the model number AXXXX at the bottom of your MacBook to determine the compatibility. Please read: luvcase laptop plastic case cover is only compatible with macbook pro 13 inch 2020 & 2018 & 2017 & 2019 & 2016 with or without Touch Bar, A2159, A1989, A1706 or A1708.

We would not be held responsible if you purchase the wrong size. 4 rubberized feet keeps your MacBook Pro 13 Inch Laptop Notebook Stable and Secure. Snap on design, Easy to Take it On and Off. This macbook pro 13. 3 2020 & 2017 & 2018 & 2019 & 2016 case contains a layer of rubber oil paint for a Smooth Rubberized Exterior Texture - Prevent Fingerprints, Scratches, Dirt, Drops, Slipping, Smudges, Liquid and Other Damages.
BrandLUVCASE #ad
ManufacturerLuvCase #ad
Part Number2016PRO13-PM+KC+SP+MS+USB
Model2016PRO13-PM+KC+SP+MS+USB

8. RUBAN

#ad

Plastic Hard Case Shell Cover & Keyboard Cover, Gold, RUBAN Case Compatible with MacBook Pro 13 inch 2019 2018 2017 2016 Release A2159 A1989 A1706 A1708 with/Without Touch Bar

#ad
RUBAN #ad - The considerate design lets you open/close your MacBook all the way and have full access to all ports. Totally removable snap on case, easy to put on or take off. Four non-slip grip pads on the bottom cover keep your MacBook firm in place and anti-falloff design prevents the grip pad from falling off.

Not compatible with any previous MacBook Pro models. Please check the model number "A1xxx" on the back of the MacBook before purchase. The ventilation design on the bottom cover allows your MacBook to release heat properly. Compatible with: macbook pro 13" 2019 - muhn2ll/a, mpxt2ll/a, muhp2ll/a, mnqg2ll/a, mnqf2ll/a, mr9r2ll/a, mv992ll/a, mpxw2ll/a, mr9v2ll/a. High quality coating on both top and bottom covers offers smooth perfect surface and feels nice to touch.

Macbook pro 13" 2017 - mpxq2ll/a, mv9a2ll/a. Specifically designed for macbook pro 13 inch 2019 2018 2017 2016 release models a2159 a1989 a1706 A1708. Pro 13" 2016 - mlh12ll/a, mv962ll/a, muhr2ll/a, mv972ll/a, mpxr2LL/A, MLUQ2LL/A. Macbook pro 13" 2018 - mr9q2ll/a, mpxu2ll/a, mll42ll/a, mpxv2ll/a, muhq2ll/a, mlvp2ll/a, mr9u2ll/a, mpxx2ll/a, mpxy2ll/a.
BrandRUBAN #ad
ManufacturerRUBAN #ad
Height0.6 Inches
Length12 Inches
Weight0.5 Pounds
Width8.5 Inches
Part NumberPRO13-2016-2PC-GD
ModelPRO13-2016-2PC-GD

9. ProCase

#ad

ProCase MacBook Pro 13 Case 2019/2018/2017/2016 Release with/Without Touch Bar A2159 A1989 A1706 A1708, Heavy Duty Hard Shell Protective Cover with Fold Kickstand for Apple MacBook Pro 13” –Grey

#ad
ProCase #ad - Please kindly check the model number "Axxxx" on the back of the macbook before your purchase. No cut out design, apple logo shines through the case; Built-in foldable stand provides an ergonomic typing angle and a better visual experience, helping to relieve your neck strain.

Not compatible with any MacBook Pro previous models. Shockproof protective shell case for apple macbook pro 13" 2019/ 2018/ 2017/ 2016 released with retina display model numbers: A2159 A1989 A1706 with Touch Bar; A1708 without Touch Bar. Compatible with models : release in 2019 -- muhn2ll/a, mv992ll/a, mluq2ll/a, mpxr2ll/a, mpxx2ll/a, mv9a2ll/a; release in 2018 -- mr9q2ll/a, mv962ll/a, mpxt2ll/a, mpxw2ll/a, mlh12ll/a, mr9r2ll/a; release in june 2017 -- mpxv2ll/a, mnqf2ll/a, muhr2ll/a, MPXY2LL/A, mv972lL/A, mlvp2ll/a, MUHP2LL/A, muhq2ll/a, mpxq2ll/a, mpxu2ll/a; release in october 2016 -- mll42ll/a, MNQG2LL/A.

Heavy duty armor shell with carefully engineered shock-absorbent wraparound bumper, drops, provides supreme protection against accidental scuffs, falls, scratches and other damages. Fully vented for safe heat disbursement; Easy access to all ports and features, you can plug your charger, cable or headset without removing the case.
BrandProCase #ad
ManufacturerProCase #ad
Height0.45 Inches
Length12 Inches
Weight0.33 Pounds
Width8.38 Inches
Part NumberPC-08361944
ModelPC-08361944
WarrantyManufacturer Warranty

10. IBENZER

#ad

IBENZER New 2020 MacBook Pro 13 Inch Case M1 A2338 A2289 A2251 A2159 A1989 A1706 A1708, Hard Shell Case with Keyboard Cover for Apple Mac Pro 13 Touch Bar2020-2016, T13CYCL+1A, Crystal Clear

#ad
IBENZER #ad - Attention - no logo cut out design, transparency is different from color to color. Check your model - only for new macbook pro 13 inch case models: m1 / a1989 / a1706 / a2251 / a2159 / a2289 / a2238 / a1708 -- release in 2020 2019 2018 2017 2016 - muhn2ll/a, muhr2ll/a, mpxq2ll/a, mnqf2ll/a, mluq2ll/a, mv9a2ll/a -- mr9q2LL/A, mr9r2ll/a -- mpxv2ll/a, mpxx2ll/a, mv972ll/a, mlvp2ll/a, mpxt2ll/a, mpxw2ll/a, mv992ll/a, muhp2ll/a, mpxu2ll/a -- mLL42LL/A, muhq2ll/a, mv962ll/a, mlh12ll/a, mpxy2ll/a, mpxr2ll/a, MNQG2LL/A.

Not fit - this case is not compatible with old macbook pro 13 with retina Display Released BEFORE 2016. A please kindly check the model number at the bottom of your laptop(A****). 1 year warranty included. Easy installation & removal - our protective cover has micro clips that securely fastens to your Mac Book Pro 13 Case, and snaps off with easy when needed.
BrandIBENZER #ad
ManufacturerIBENZER #ad
Height0.6 Inches
Length12 Inches
Width8.5 Inches
Part NumberMMP13T-CYCL+1A