#ad
#ad
Mophorn #ad - Adjust rotary stir knob clockwisely to start the equipment. The magnetic stir plate has 2 knobs,one for heating temperature adjustment,the other one for stirring speed adjustment. Put in your reaction bulb with solution2. Glass/digital thermometers can be used for supplementaryFeatures:Large heating area and fast warm-upHigh temp evenness & accurate tem-controlTime & cost saving, easy operation and effectiveStepless speed operationSpecification:Voltage: 110V 60HzMax.

Remember to turn off the machine after use Stirring capacity:1000ml; heating power: 350w; max. Then the indicator light will light up and the brightness will change according to the position of the pointer3. Adjust the stirring intensity according to the concentration and amount of the solution4. How to use:1.

Mophorn Heating Mantle 1000ml Heating Mantle 350W Heating Mantle Magnetic Stirrer 0-1400 RPM Lab Heating Mantle for Liquid Heating #ad - It features alkali-free glass fiber insulation and a nickel-chromium alloy resistance wire in a hemispherical internal heater. It's normal if you observe white smoke with machine surface changing into brown during first use. 2. Heating and stirring can proceed simultaneously or alone3. Keep stirring solution from splashing to avoid injury or damage to the machine5.

Make sure to start stirring with slow speed4.

More information about Mophorn #ad

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head

#ad
#ad
EISCO CH0688 #ad - Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Jaws have a capacity of 90 mm. Extends out approximately 5" from rod, not adjustable. Attaches to rods up to 15 mm in diameter. Can mount vertical or horizontal -- rotates on clamp.

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head #ad - Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter.

More information about EISCO CH0688 #ad


Similar products



Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set

#ad
#ad
EISCO #ad - Perfect setup for a lab. Blue powder coated support stand base 8" x 5. 25". Laboratory grade metalware Set - Support Stand 8" x 5. 25", stainless steel Rod 23" L, 045" dia. 10x1. 5 thread, Bosshead clamp 4. 25", 4 prong clamp and Retort Ring 2. 6" dia1 base, 1 retort ringthis premium set includes a stand, clamps and ring, 1 Bosshead Clamp 1 Cork Lined 4 Prong Clamp, rod, 1 Rod, all in one package - eliminating the need to piece together a system for your classroom or lab.

Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set #ad - 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Extends out approximately 5" from rod, not adjustable. Can mount vertical or horizontal -- rotates on clamp. Made from high-quality metal and built to last. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Stainless steel rod with a powder coated base provides the perfect setup for any experiment. Attaches to rods up to 15 mm in diameter. Stainless steel rod 23" length, 0

More information about EISCO #ad


Similar products



7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color

#ad
#ad
Hotodeal #ad - Extends out approximately 5" from rod, not adjustable. Used to stir a liquid or solution in biological, chemical, medical and research laboratory applications. High temperature up to 250 ℃, low temperature up to -196 ℃. With acid and alkali resistance, resistant to a variety of organic solvents, almost insoluble in solvents.

7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color #ad - Stir bars are coated with teflon PTFE covering, built-in pivot axle helps to reduce vibration and wear during stirring. These are brand new, never used, PTFE stirrer bars. Perfect setup for a lab. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Can mount vertical or horizontal -- rotates on clamp. Stainless steel rod 23" length, 045" dia. 10-1.

More information about Hotodeal #ad


Similar products



Dinglab,500ml Chemistry Lab Glassware Kit,Glass Distilling,Distillation Apparatus,24/40

#ad
#ad
Dinglab 500ml2440diskit #ad - 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Annealing point --560℃. Perfect setup for a lab. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Dinglab, glass distilling, 500ml chemistry Lab Glassware Kit, distillation Apparatus, 24/40 ,Be Made From G3.3 borosilicate glass,The neck is 24/40 Ground Joint. 500ml 24/40 round bottom flask250ml 24/40 round bottom flask200mm 24/40 liebig condenser3 way thermometer adapter with 24/40 joint24/40 Vacuum take-off adapter300mm 200 Celsius thermometer6*9 Rubber Hose24/40 Plastic clip Attaches to rods up to 15 mm in diameter.

Dinglab,500ml Chemistry Lab Glassware Kit,Glass Distilling,Distillation Apparatus,24/40 #ad - Linear coefficient of Expansion-- 32×10-7/℃. Used to stir a liquid or solution in biological, chemical, medical and research laboratory applications. High temperature up to 250 ℃, low temperature up to -196 ℃. With acid and alkali resistance, resistant to a variety of organic solvents, almost insoluble in solvents.

Stir bars are coated with teflon PTFE covering, built-in pivot axle helps to reduce vibration and wear during stirring. These are brand new, never used, PTFE stirrer bars. Be made from g3.

More information about Dinglab 500ml2440diskit #ad


Similar products



StonyLab 3 Way Distilling Thermometer Adapter with 24/40 Joints and Screw Cap for Distillation Apparatus

#ad
#ad
StonyLab Scientific #ad - The stonylab means high-quality products for reasonable prices. Perfect setup for a lab. Why choose StonyLab? 1. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Softening point--820℃. Attaches to rods up to 15 mm in diameter.

We boast excellent customer service with a high satisfaction rating, with our team of representatives ready to assist you Monday to Friday, from 9:30AM to 5:30PM Eastern Time. 24/40 joint. Stonylab ensures high quality and premium customer service. Extends out approximately 5" from rod, not adjustable. 3 way.

StonyLab 3 Way Distilling Thermometer Adapter with 24/40 Joints and Screw Cap for Distillation Apparatus #ad - Blue powder coated support stand base 8" x 5. 25". Linear coefficient of Expansion-- 32×10-7/℃. Used to stir a liquid or solution in biological, chemical, medical and research laboratory applications. High temperature up to 250 ℃, low temperature up to -196 ℃. With acid and alkali resistance, resistant to a variety of organic solvents, almost insoluble in solvents.

Stir bars are coated with teflon PTFE covering, built-in pivot axle helps to reduce vibration and wear during stirring.

More information about StonyLab Scientific #ad


Similar products



Deschem 500ml,24/40,Glass Distillation Apparatus,New Chemistry Lab Glassware Kit

#ad
#ad
Deschem #ad - Distillation column, 24/40 200mm 1 Pc8. 24/40 joint. Vacuum take-off adapter, 24/40 105°bend 1 Pc3. Distillation Adapter. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Round bottom flask, 24/40, single neck, 500ml 500ml 1 Pc7.

Linear coefficient of Expansion-- 32×10-7/℃. 3 way. Linear coefficient of Expansion-- 32×10-7/℃. Used to stir a liquid or solution in biological, chemical, medical and research laboratory applications. High temperature up to 250 ℃, low temperature up to -196 ℃. With acid and alkali resistance, resistant to a variety of organic solvents, almost insoluble in solvents.

Deschem 500ml,24/40,Glass Distillation Apparatus,New Chemistry Lab Glassware Kit #ad - Stir bars are coated with teflon PTFE covering, built-in pivot axle helps to reduce vibration and wear during stirring. These are brand new, never used, PTFE stirrer bars. Be made from g3. 3 borosilicate Glass. 500ml, glass distillation Unit, Distillation Laboratory glassware kit with joints1. Rubber hose id6mm OD9mm 2 Mete9.

Softening point--820℃.

More information about Deschem #ad


Similar products



American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size

#ad
#ad
American Educational 7-G15-A #ad - Blue powder coated support stand base 8" x 5. 25". Softening point--820℃. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. The rods are nickel plated steel and are threaded to fit the base. Type is coated with an acid resistant finish. Coated with an acid resistant finish. Used to stir a liquid or solution in biological, chemical, medical and research laboratory applications.

High temperature up to 250 ℃, low temperature up to -196 ℃. With acid and alkali resistance, resistant to a variety of organic solvents, almost insoluble in solvents. Stir bars are coated with teflon PTFE covering, built-in pivot axle helps to reduce vibration and wear during stirring. These are brand new, never used, PTFE stirrer bars.

American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size #ad - Be made from g3. 3 borosilicate Glass. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Borosilicate glass, Heavy Duty Design, Reusable & High quality. 3 way. Softening point--820℃. Annealing point --560℃.

More information about American Educational 7-G15-A #ad


Similar products



Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2

#ad
#ad
Soccerene #ad - Strong and dependable support. 24/40 joint. Coated with an acid resistant finish. Give our product a try by ordering today. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Be made from g3.

3 borosilicate Glass. Can mount vertical or horizontal -- rotates on clamp. Distillation Adapter. Flask support firmly holds 250-2000 mL round bottom flasks, and its outer diameter is 110 mm. The flask support is made of high quality cork, strong heat and electrical insulation, it has very good elasticity, friction resistance.

Soccerene Lab Flask Support Cork Stand 110mm / 4.3" Diam. for 250-2000mL Flasks Pack of 2 #ad - Flask support is non-toxic, small proportion, tasteless, not easy to get fire, eco-friendly product. Perfect for holding your flasks or other spherical bottom containers from failing easily. 100% money back guarantee - we want you to be 100% Satisfied with your purchase. 3 way. Linear coefficient of Expansion-- 32×10-7/℃.

Borosilicate glass, Heavy Duty Design, Reusable & High quality.

More information about Soccerene #ad


Similar products



Green - StonyLab Plastic Joint Clips, 10 pcs 24mm Keck Clamp #24 Lab Keck Clips for 24/29 24/40 Joint Glass Standard Conical Interface Clip Ground Glass Joint Lab Accessory

#ad
#ad
StonyLab Scientific #ad - Stonylab ensures high quality and premium customer service. Strong and dependable support. 10 pcs. 3 way. Coated with an acid resistant finish. Extends out approximately 5" from rod, not adjustable. Annealing point --560℃. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Use for Glass Ground Joint. Annealing point --560℃. Linear coefficient of Expansion-- 32×10-7/℃. 1 attaches to rods up to 15 mm in diameter. The rods are nickel plated steel and are threaded to fit the base. Linear coefficient of Expansion-- 32×10-7/℃. Absolutely no risk. Flask support firmly holds 250-2000 mL round bottom flasks, and its outer diameter is 110 mm.

Green - StonyLab Plastic Joint Clips, 10 pcs 24mm Keck Clamp #24 Lab Keck Clips for 24/29 24/40 Joint Glass Standard Conical Interface Clip Ground Glass Joint Lab Accessory #ad - The flask support is made of high quality cork, strong heat and electrical insulation, it has very good elasticity, friction resistance. Flask support is non-toxic, tasteless, small proportion, not easy to get fire, eco-friendly product. Perfect for holding your flasks or other spherical bottom containers from failing easily.

100% money back guarantee - we want you to be 100% Satisfied with your purchase.

More information about StonyLab Scientific #ad


Similar products



Dow Corning Vacuum Lubricant 5.3oz Tube

#ad
#ad
Dow Corning 77472132287 #ad - 24/40 joint. Softening point--820℃. Give our product a try by ordering today. Compatible with 24/40 Designed for sealing and lubricating vacuum and pressure systems. Lubricating o-rings in binoculars and telescopes. Borosilicate glass, Heavy Duty Design, Reusable & High quality. Strong and dependable support. Stainless steel rod 23" length, 0

45" dia. 10-1. 5 thread. Lab Accessory. Blue powder coated support stand base 8" x 5. 25". Coated with an acid resistant finish. 10 pcs. Be made from g3. 3 borosilicate Glass. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4. 25". Metal retort ring 2. 6" diameter. Sealing vacuum and pressure systems.

More information about Dow Corning 77472132287 #ad


Similar products